fluke networks network inspector download

FLUKE NETWORKS NETWORK INSPECTOR DOWNLOAD HOW TO
FLUKE NETWORKS NETWORK INSPECTOR DOWNLOAD SOFTWARE

There are four main Protocol Inspector views, which include the following: Summary View Detail View Capture View of Capture Buffers Capture View of Capture Files The program opens in the Summary View. If answering yes or if the following screen appears, just click on OK without selecting any ports. Note: The first time the program is run, a message will appear that asks, Do you have any Fluke analyzer cards or Fluke taps in your local system? If using the educational version, click on No.

Configure the workstations as follows, which is the same as the NI lab: Host #1 Host #2 IP Address: IP Address: CCNA 1: Networking Basics v Lab 7.1.9b Copyright 2003, Cisco Systems, Inc.Ģ Subnet mask: Subnet mask: Default Gateway: Default Gateway: Step 2 Start Protocol Inspector EDV program From the Start menu, launch the Fluke Protocol Inspector EDV program. These files are available from the instructor. Load the configuration files Lab3-SanJose1Config.txt and Lab3-SanJose2Config.txt into the appropriate routers. Step 1 Cable the lab as shown in the diagram Note: This is exactly the same lab configuration as the Network Inspector lab. However, each host may display slightly different results.

FLUKE NETWORKS NETWORK INSPECTOR DOWNLOAD SOFTWARE

If the lab is done in pairs, having the software installed on both machines means that each person can run the lab steps. At least one of the hosts must have the Protocol Inspector software installed. The configuration contains several components for testing purposes and is not intended to represent a good production configuration. They will be used for other labs, so please do not change any configuration settings. Note: The configuration files used for this lab are available from the instructor. While the Protocol Inspector (PI) software is a valuable part of the Academy program, it is also representative of features available on other products in the market. This lab introducing Protocol Inspector will be useful in later troubleshooting labs as well as in the field. Output will vary depending on the number of devices added, device MAC addresses, device hostnames, which LAN is joined, and so on.

Background / Preparation The output in this lab is representative only. This lab will demonstrate key features of the tool that can be incorporated into various troubleshooting efforts in the remaining labs.

FLUKE NETWORKS NETWORK INSPECTOR DOWNLOAD HOW TO

1 Lab 7.1.9b Introduction to Fluke Protocol Inspector DCE SanJose1 S0/0 S0/0 SanJose2 #1 #2 Objective This lab is a tutorial demonstrating how to use the Fluke Networks Protocol Inspector to analyze network traffic and data frames.

Fluke networks network inspector download